Smart Hybrid System

5kVa inverter with expandable storage

Key Documents

Download the Smart Hybrid Data Sheet

Download the Redback Installer Brochure

The all-in-one solar inverter and battery storage solution

The Smart Hybrid System is your easy to install, all-in-one solution for single phase homes.

It combines a 5kVA hybrid inverter with expandable battery storage from 4.8kWh to 14.2kWh (or 28.4kWh with optional expansion cabinet) and includes integrated isolators and pre-wired BoS for your convenience.

SH5000

Redback Smart Hybrid System SH50000 on Grey Concrete Background
Redback Smart Hybrid SH5000 Dimensions

4.8kWh – 28.4kWh
Battery Storage

Battery supply in a power outage*

*When backup circuit is connected, and battery energy is available. Appliances selected at the time of install.

Streamlined all-in-one design

Smart Load Control icon White

Smart Load Control

Site manager icon

Site Manager

Easy commissioning with the RedbackInstall app

Red Icon Showing 10 Years in a Shield

10-year Australian-backed warranty

Suitable for indoor and outdoor installation

Australia icon

Australian engineered for Australian conditions

Meet Smart Load Control

Smart Load Control feature allows homeowners to make the most of their self-generated energy by operating a single large load (such as a pool pump or hot water system) when there is excess solar energy available.

Smart Load Control is a sophisticated system that aims to:

  • Run the load using only excess PV energy.
  • Avoid switching the load excessively (e.g., when a small cloud passes in front of the sun).
  • Optionally, the system will ensure that the load runs for a nominated number of hours each day. This is useful for equipment like pool pumps or hot water systems which require a minimum daily runtime.

The Smart Load Control feature is available across the entire Redback range. For more information, please refer to the Installation Guide found in the Redback Portal.

Introducing Site Manager for the Smart Hybrid System

Site Manager allows you to install multiple Redback battery storage systems at a single site (behind the same meter) and have them operate in tandem, in order to get the best results from your batteries. When configured correctly, the charging and discharging of the batteries is balanced across all systems on the site to ensure the equal utilisation of every system. Site Manager requires that one of the systems is nominated as the “Master”. The Master controls the other systems on the site, referred to as “Workers”.

Site Manager makes use of the site’s local area network (LAN) for communications between systems. This means that it is often possible to enable Site Manager on sites that already have systems installed. The settings can be applied remotely via Redback’s portal: in most cases, a site visit will not be required. For more information, please refer to the Installation Guide found in the Redback Portal.