The Hybrid Battery System
Redback’s smarter, larger and more robust all-in-one hybrid
The Hybrid Battery System is your easy-to-install, all-in-one solution for single-phase homes. It combines a 5kVA or 6kVA hybrid inverter with battery storage of 9.6kWh, 14.4kWh or 19.2kWh, with a 95% DoD.
The Hybrid Battery has integrated isolators, a pre-wired BoS, pre-wired switchgear, optimised AC and DC connections, remote meter check and CT flip, a streamlined app experience, and over-the-air updates leading to fewer site visits. Wi-Fi and 4G connectivity are included with the Hybrid Battery System, as well as a market-leading VPP functionality.
SH5000-G3 & SH6000-G3
Market leading VPP functionality
4G and WiFi connectivity included
(Compatible with the latest WiFi routers)
Easy commissioning with the RedbackInstall app
10 year Australian-backed warranty
Indoor or outdoor installation
Engineered for Australian conditions
Meet Smart Load Control
Redback’s Smart Load Control feature allows homeowners to make the most of their self-generated energy by operating a single large load (such as a pool pump or hot water system) when there is excess solar energy available.
Smart Load Control is a sophisticated system that aims to:
- Run the load using only excess PV energy.
- Avoid switching the load excessively (e.g., when a small cloud passes in front of the sun).
- Optionally, the system will ensure that the load runs for a nominated number of hours each day. This is useful for equipment like pool pumps or hot water systems which will require a minimum daily runtime.
The Smart Load Control feature is available across the entire Redback range. For more information, please refer to the Installation Guide found in the Redback Portal.
Site Manager for the Hybrid Battery System
Site Manager allows you to install multiple Redback battery storage systems at a single site (behind the same meter) and have them operate in tandem, to get the best results from your batteries. When configured correctly, the charging and discharging of the batteries is balanced across all systems on the site to ensure the equal utilisation of every system. Site Manager requires that one of the systems is nominated as the “Master”. The Master controls the other systems on the site, referred to as “Workers”.
Site Manager makes use of the site’s local area network (LAN) for communications between systems. This means that it is often possible to enable Site Manager on sites that already have systems installed. The settings can be applied remotely via the Redback Portal: in most cases, a site visit will not be required. For more information, please refer to the Installation Guide found in the Redback Portal.
